Most Balanced. Weight sits closest to your hands. Fastest through the zone, maximum barrel control.
products.product.pickup_availability.unavailable
In stock · ships next business dayHand-built in Cheshire, CT
Shipping calculated at checkoutShips via UPS, FedEx, or USPS
30-day warranty on every Tater® wood batInk dot certified · bone-rubbed · pro-grade maple
The best wood bats on the market
Pro woodPro-grade maple, hand-selected.
High-gloss finishProprietary coating on every bat for maximum hardness.
Hand-split & bonedSplit with the grain, ink dot tested, bone-rubbed.
The Tater® X4 PRO Pine Tar Bat with charcoal handle is a two-tone X4 pine tar bat. The barrel captures the pine tar look — sealed into the maple, no smell or mess. The handle goes dark charcoal for a clean two-tone aesthetic. Hand-built in Cheshire, CT and ready to ship.
The X4 pine tar bat with the charcoal handle finish
This is the X4 turn profile in Tater Baseball®'s signature pine tar visual style. The barrel carries the pine tar look — sealed, not surface-applied, so it doesn't transfer to your gloves or gear. The charcoal-handle finish balances the look with a dark grip. It contrasts the barrel and reads pro on the rack.
Why pine tar without the actual pine tar
We as ballplayers know through experience that the pine tar look is swaggy. But real pine tar comes with cons. It can ruin the rest of your gear or other bats. Putting it in your bag, resting it on your shoulder, or grabbing it with batting gloves spreads tar everywhere. You won't notice until it's on everything. The Tater® version is sealed into the wood — you get the look without the cleanup.
Specs at a glance
Wood species: Maple
Knob: Flared
Handle: Thin (charcoal finish)
Barrel: Medium (pine tar finish)
Feel: Balanced
Swing weight: -3 (Drop 3)
Finish: Two-tone — charcoal handle / pine tar barrel
Warranty: 30-day
Made in: Cheshire, Connecticut
Built on the X4 PRO profile
This bat is built on our Tater-X4 PRO turn profile in maple. Want the pine tar look on a different model? Try the X12 Original Pine Tar Bat instead. Or for a fully different finish, head to our Custom Bat Builder. Custom builds take about 10-14 business days.
Built by an MLB bat supplier in Cheshire, CT
Tater Baseball® invented the sealed pine tar style. Every bat in this run is hand-built in Cheshire, Connecticut. Each is finished to the same standard as our MLB player bats. New to wood bats? Start with the Wood Bat Size Chart before you commit to a length and drop.
TRUSTED BY PROS
USED IN THE BIG LEAGUES AND INTERNATIONALLY
Tater® vs. other brands
There's a reason pros are switching to swing Tater®
Most wood bats are made for retail shelves — lower-grade lumber, bulk machining, inconsistent pop. The Tater® Wood Bat is hand-split, hand-finished, and bone-rubbed to MLB standards.
Higher density wood lasts longer and provides better “pop” off the barrel.
Ink dot tested to prove our bats meet professional standards.
Hand-split wood follows the natural grain, making bats stronger, more durable, and less likely to break.
Bone rubbing compresses the wood fibers, making the bat harder, improving durability, and increasing ball exit speeds.
Feature
Tater® Wood Bat
Store-bought bats
Other brands
DurabilityBuilt for full-season use.
YesBuilt to last
NoBreaks down fast
VariesVaries by brand and model
Bat popExit velocity off the barrel.
YesExplosive & consistent
NoWeak exit velocity
NoInconsistent
Price pointQuality per dollar.
YesPremium that performs
NoOverpaying for low quality
NoOften overpriced for similar quality
MLB-grade woodProfessional lumber spec.
YesPro grade only
NoLower grade
VariesSome use MLB wood, others choice/select
Pro certifiedInk dot tested to MLB spec.
YesCertified pro grade
NoNot certified
YesCertified
RatingsCustomer star reviews.
5 out of 5 stars5 / 5
3 out of 5 stars3 / 5
4 out of 5 stars4 / 5
When you swing wood, the difference isn’t subtle. Every Tater® bat is hand-split, hand-finished, ink dot certified, and bone-rubbed to MLB spec — backed by a 30-day warranty.
A TRADITIONAL LOOK
WITH A MODERN APPROACH
We invented this look to fill the void for the modern ballplayer. Our Pine Tar bats are one of our top sellers made from with a flame tempered neck to give it that classic pine tar look without all the mess.
Frequently Asked Questions
What's the two-tone Charcoal Handle / Pine Tar Barrel finish?
The two-tone finish flips the colors on a traditional pine tar look — instead of the pine tar running down the handle, the barrel carries the sealed pine tar finish while the handle goes dark charcoal. The result is a clean two-tone aesthetic that reads pro on the rack. The pine tar finish is sealed into the wood, not surface-applied, so it doesn't transfer to your gloves or gear.
Is this built on the same X4 PRO turn?
Yes — the bat is built on our standard X4 PRO turn profile in maple. Same balanced feel, same RA13-inspired shape, same MLB-grade billets. The only difference is the finish.
How fast does this ship?
This is a stock model — ships the next business day from our shop in Cheshire, CT. No custom build queue.
What size wood bat should I order?
Most high school, college, and adult hitters swing 32"–34" at a -3 drop, meaning the weight in ounces is 3 less than the length in inches (a 33" bat weighs about 30 oz). Youth players usually swing 26"–31" depending on age. Between sizes? Go shorter: a bat you can control beats a bat you can't. Switching from metal? Wood swings heavier at the same length, so a balanced model like the X12 or 271 is a good start. Wood bats are allowed in most high school, college, and adult leagues (BBCOR certification applies to metal and composite bats, not wood), but rules vary, so check your league's rulebook. For a recommendation by height, weight, and level, see our Wood Bat Size Chart at www.taterbaseball.com/pages/wood-bat-size-chart
What types of wood are Tater bats made from?
Hard maple and yellow birch — both MLB-grade. Maple has been the pro standard for over 20 years: densest, hardest hitting surface, biggest pop on clean contact, but a smaller sweet spot and less forgiveness on mis-hits. Birch sits between maple and ash — similar density to maple with more flex on impact, which makes it more forgiving on mis-hits and a smart starting point for hitters transitioning from metal to wood. Read the full breakdown in our Maple vs Birch vs Ash guide at /blogs/the-lumber-yard/differences-between-maple-birch-and-ash-bats.
Do you offer discounts for team or bulk orders?
Yes. Team and bulk pricing starts at 12 bats, and team engraving is available. Send your models, sizes, roster count, and when you need them to contact@taterbaseball.com or through /pages/contact-us, and we'll send a quote within one business day. The bigger the order, the better the price per bat.
Are Tater bats suitable for professional play?
Yes. Tater Baseball is an MLB-supplier wood bat company — our bats are swung by professional players at the highest level of the game. There is no separate "consumer-grade" production line. The same MLB-grade billets, the same hand-finishing process, and the same QA standards apply to every retail bat we ship as to the bats we cut for pro hitters.
What is the warranty on Tater wood bats?
Every Tater wood bat has a 30-day warranty against cracking from normal use, starting on the delivery date. It covers bats bought on taterbaseball.com, at our Cheshire store, or from an authorized dealer like Better Baseball. If your bat cracks, email contact@taterbaseball.com with your order number and photos, and we'll replace it. To keep it valid, don't hit dimpled cage balls, don't store the bat in a hot car or garage, and don't sand or modify the handle. Unused stock bats can also be returned or exchanged within 30 days; custom and engraved bats are final sale. Full details: https://www.taterbaseball.com/pages/tater-wooden-bat-warranty and /policies/refund-policy.
Why are wood bats cupped at the end?
Cupping is a small concave dish drilled into the end of the barrel. It removes a few grams of mass from the very tip, which shifts the bat's balance point slightly toward the hands and makes the swing feel quicker through the zone. Tater hand-cups each bat, and our process allows for variable cup depths to dial in feel without compromising end-cap strength — which actually reduces the risk of chips and cracks on inside pitches.
What is the black dot on the handle?
The ink dot is a quality check. Before a billet becomes a Tater bat, we test the straightness of its grain by placing a drop of ink on the handle and watching how it spreads along the grain. Straight grain is stronger and less likely to break. The dot that stays on the handle shows the bat passed that test before it left our shop. Every Tater maple and birch bat carries one.
Customer Reviews
Overall rating: 4.9 / 5 from 21 reviews.
This bat is easily my favorite wood bat that I have ever owned. I own a batting cage facility and this is my cage bat that I use almost daily. I have over 1000 swings on this bad boy and aside from the logo rubbing off a bit (which is a user issue, not a bat issue) it has held up amazingly well. It is a very balanced bat that aligns perfectly with my swing. I’m a Tater convert.
It’s my first time picking up a bat in a while and I love how this one feels! I was curious about this brand because I got my hands on one of them off of one of the MiLB players in my hometown, unfortunately that one broke in game but I was curious and I wanted one for myself. I’m satisfied with it, definitely recommend!
Your customer support is amazing. After my son had a crack in his bat after first swing, Justin was quick to help get a replacement and put new grip tape on it. First swing of the bat, and my son hit this home run. Love Tater bats
My son has not used the bat yet. However, looks great and feel like a more balanced wood bat. The balanced feel is what he was looking for. He cannot wait to use it in the cage and on the field.